 |
|
 |
|
| Hardner EMS-9 | It is a two mix liquid type. It can use with photographic emulsion both diazo and resin, and |
| improved in solvent, water base, and printing. | |
| Especially water base, used instead of urethane reinforcement. We recommend polyester and | |
| stainless screen. | |
| After using EMS-9, the screen never use again. | |
| Using method. | 1.It paints after developing, drying, and exposing. |
| 2.Mix liquid A : liquid B 1 : 1. | |
| 3.Spread the liquid both faces with brush or sponge, after that, dry for 5-10 minutes. | |
| 4.Blow the closed mesh on pattern using air-gun. | |
| 5.Heat drying about a hour(30-40) | |
| 6.Finally, clean up with water, and dry. | |
| After mixing pot life is around a month. | |
| When you use it, you must put on the rubber glove. | |
Copyright(C)MINOSHOJI CO.,LTD. 2000-2006 All rights reserved. |
|